Videotec NXPTZSFP, Инструкция по эксплуатации

Страница: 4 / 24

EN - English - I
nstruc
tion manual
2 MNVKNXP2SFP_2015_EN
4 Identification
4.1 Product description and type
designation
Adaptor for connection of fibre optics in the NXPTZ
SERIES2 range.
5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
5.1 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
5.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Adaptor for connection of fibre optics
• Bolts and screws
• Instruction manual
5.3 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
6 Installation
Before starting any operation, make sure
the power supply is disconnected.
Unscrew the screws and remove the cover.
Fig. 1
Before assembling the accessory on the product, you
must fasten in the threaded hole the cable gland or
sheath support.
Fig. 2