Videotec MAXIMUS MVXHD, Инструкция по эксплуатации

Страница: 10 / 88

EN - English - I
nstruc
tion manual
8 MNVCMVXHDBCAM_2121_EN
6 Configuration
6.1 Default IP address
The unit is configured to obtain an IP
address from a DHCP server.
The IP address acquired via DHCP is visible in the
DHCP server log file.
If the DHCP server is not available, the unit
automatically configures itself with a self-generated
IP address in the 169.254.x.x/16 subnet. Configuring
the IP address of the PC as belonging to the same
subnet (example: IP address: 169.254.1.1, subnet
mask: 255.255.0.0).
Use an ONVIF compliant VMS or a network sniffer to
find the IP address of the device (IP scan utility).
6.2 Web interface
Browsers supported (the latest version):
Microsoft Edge, Google Chrome, Mozilla
Firefox.
6.2.1 First access to the web pages
The first operation in configuring the device consists
in connecting to the web interface.
To access the web interface of the product, simply
use a browser to connect to http://ip_address.
On first access, the Home page will be displayed.
To configure the web interface, consult the manual
relating to the firmware version installed, available on
the product web page of the website www.videotec.
com.
7 Accessories
For further details on configuration and
use, refer to the manual of the relevant
accessory or support.
8 Instructions for normal
operation
8.1 Enabling the wiper (Wiper)
Do not use the wiper if the outside
temperature is below 0°C (+32°F) or in case
of ice.
To activate/deactivate this function, refer to the
manual of the control device used or to the relative
chapter (8.3 Special controls, page 8).
8.2 Enabling the washer (Washer)
To activate/deactivate this function, refer to the
manual of the control device used or to the relative
chapter (8.3 Special controls, page 8).
8.3 Special controls
SPECIAL CONTROLS
Action Command
Protocol
HTTP API ONVIF (auxiliary
command)
Wiper Start √
1
tt:Wiper|On
Wiper Stop √
1
tt:Wiper|Off
Washer √
1
tt:Washing Proced
ure|On
Night Mode On √
1
tt:IRLamp|On
Night Mode Off √
1
tt:IRLamp|Off
Night Mode Auto – tt:IRLamp|Auto
Reboot the device
√
1 –
Autofocus
√
1 tt:Autofocus|On
Relé On – tt:Relay1|On
Relé Off – tt:Relay1|Off
Tab. 6 1 Command can be enabled, for further information
contact the support centre VIDEOTEC.