Digital Recorder
29
[+][-] Change rate by fractional amount
[TAG] Default rate to zero (Off) or maximum
[OK] Copy rate of this camera to all others
Night
The alarm night-time record rate for each camera is set here.
Note that these setting only apply to those particular cameras with alarm status. The
requested rates for other cameras will be as per the non-alarm settings.
If the requested rates cannot be achieved, the DVR will scale down all rates such that they
can be achieved. The actual rate are displayed in square brackets [].
Note that cameras with activity detection enabled are given a rate of at least 1 picture per
second (pps)and those with remote access in progress, a rate of at least 3 pps.
[<][>] Move cursor to each camera
[Inc][Dec] Change rate by 5pps steps
[^][v] Change rate by whole numbers
[+][-] Change rate by fractional amount
[TAG] Default rate to zero (Off) or maximum
[OK] Copy rate of this camera to all others
Alarm Cameras (custom)
Under alarm or activity conditions, you can select here whether all cameras are recorded or
just those with alarms or activity.
Quality
Each camera may be assigned a different image quality. As you change the quality, you can
see the effects on the visible parts of the image.
A higher image quality (size) results in more disc space being used for a given record rate
(or slower update for a given data retention period).
Conversely, a lower image quality (size), results in less disc space being used for a given
record rate (or faster update for a given data retention period).
[<][>] select camera
[^][v] Adjust quality
[TAG] Set defaults
[OK] Make all camera the same
Image Size Control
This is a global setting for image size that affects the recorded image quality of all cameras.
When you have selected this overall image size, go into the Quality menu where you can
individually adjust camera quality and see the effects.
Audio Sensitivity
If audio record has been enabled in the CONFIGURATION menu, this setting adjust audio
sensitivity.
Do a test recording to check that audio is being recorded satisfactorily.
If clipping distortion is apparent, reduce sensitivity.
Intelligent Security and Fire Ltd
