Videoswitch 35
Pos601a.doc
Vi-POSCON Installation Guide
passing data.
NOTE 2: It may be necessary to switch the printer interface into
Test Mode to perform diagnostics (refer to the Installation
Document for the printer interface, for switch setting details).
5. Data Cable between Vi-
POSCON controller
If data exists at the printer interface output, check the continuity
of the data cable between the Vi-POSCON and the printer
interface (refer to the Installation Document for the printer
interface, for the connection details).
6. Cable from the cash
register
If no data at the printer interface output;-
Check the connections between register and the printer
interface input (refer to the Installation Document for the printer
interface, for details).
Check to ensure that the correct printer interface has been
installed for the cash register.
If a 5001 Serial printer interface, check to ensure that the input
baud rate matches that of the register output baud rate (refer to
the Installation Document for the printer interface, for the input
baud rate switch settings).
7. Power to printer interface If still no data, check for either 12Vdc or 24Vac from the printer
interface power supply. If no 12Vdc or 24Vac, check input to
the transformer.
