Videoswitch 19
Pos601a.doc
Vi-POSCON Installation Guide
6 Configuring the Vi-POSCON System
This section describes the procedures for configuring the Vi-POSCON System.
You use the mouse to access the menus, make selections, and input settings. The term
click
as used
in these instructions means to press and release the
left
mouse button. When necessary, the
instructions will specify to "click the right mouse button".
Following is a suggested sequence of events for configuring your Vi-POSCON System. The menu to
use and the page on which it appears is shown in parenthesis following the event.
Verify the software version (Service, 14).
Set the language for the menus (Service, 13).
Set the video type (Service/Screen Attributes, 19)
Set the number of active channels (Service, 13).
Set the unit status (Service, 14).
Set the currency format (Service, 14).
Set the printer type (Service, 14).
Set synchronize clock (Service, 14)
Set the baud rate (Service/Channel Attributes, 17).
Set the line filtering (Service/Channel Attributes, 17).
Set the register identity (Service/Channel Attributes, 17).
Set the text colour (Service/Channel Attributes, 17).
Set the text window border (Service/Channel Attributes, 18)
Set the text window position (Service/Channel Attributes, 18).
Set the text window size (Service/Channel Attributes, 18).
Display the channel bar (Service/Screen Attributes, 18).
Display the date and time (Service/Screen Attributes, 18).
Set and activate alarm events (Service, 15).
Clear the user password (Service second screen, 19).
Print the system settings (Service second screen, 19).