Videoswitch Vi-K2, Руководство пользователя

Страница: 17 / 107

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
15
3 Vi-K3 Configuration
3.1 Quick Configuration
This section describes how to set-up the Vi-K3 for use with any one type of dome. For more complex
configurations, see section 3.2.
•
Holding the
ALT
key on, press the
CONFIG
key.
•
The LCD display will show “
Password
”, indicating that a password must be entered.
•
Press the number keys
1
,
2
,
3
,
4
,
5
,
6
(to enter default password).
•
Press the
OK
key
•
Use the LEFT and RIGHT keys to select the required protocol
•
Holding the
ALT
key on, press the
CONFIG
key to save the configuration
The Vi-K3 is now ready to control all domes connected to the “
DOMES-1
” output and a Digital Recorder
connected to the “
Out
” output.
3.2 Full Configuration
3.2.1 Restore Factory Configuration
If you wish to return all settings to the factory defaults, follow this procedure:
•
Power on the Vi-K3 while pressing the
ALT
key. Keep pressing the
ALT
key (for about 10 seconds)
until the word “
Store
” is displayed on the LCD display.
•
The Vi-K3 now has all factory settings restored.
3.2.2 Entering Menu
•
Holding the
ALT
key on, press the
CONFIG
key.
•
The LCD display will show “
Password
”, indicating that a password must be entered.
•
Press the number keys
1
,
2
,
3
,
4
,
5
,
6
(to enter default password).
•
Press the
OK
key
3.2.3 Configuration
The V-K3 can now be configured using the following keys:
•
UP and DOWN keys - select configuration item to be set
•
INC and DEC keys - select auxillary parameter to be set
•
LEFT and RIGHT keys - change setting
3.2.4 Exiting Menu
•
To exit the menu, holdthe
ALT
key on, then press the
CONFIG
key.