Operation Guide
OSD MENU FUNCTION
The pattern means camera could operate a
series of motion, such as pan/tile rotating,
zoom, etc. User could start pattern to play-
back all operation. The camera supports 4
pattern tours and each pattern cover at
most 10 Minutes of 500 commands. Please
check the following steps to set up a
pattern:
1.Pattern No.
Click up/down key to ”Pattern No.”,
click up/down to set pattern number, click
left/right to choose.
2.Enable pattern
Click up/down to “enable pattern
path”
，
click left/right to start corresponding
pattern path number.
2. Pattern Start
Click up/down to “Pattern start”, click left/
right to start corresponding pattern No.
3.Set Pattern Tour
Click up/down to “pattern set”, click
left/right to pattern mode, user’s control of
horizontal and vertical rotating and zoom
trace will be record in the device, when
record is full or click focus far, will finish
pattern setting.
4.Delete pattern
Click up/down to delete, click left/
right to delete corresponding pattern number
of patter
3.4.3
Pattern
INFORMATION
CAMERA
IMAGE
[
MOTION ]
RESTART
DEFAULT
EXIT
MAIN MENU
SCAN
SEQUENCE
[
PATTERN ]
BACK
EXIT
MOTION
[
PATTERN No.
1
]
PATTERN SET
PATTERN DELETE
PATTERN START
BACK
EXIT
PATTERN
Vi-C6201
