Videoswitch
VDM Digital Recorder
Vdm601r.doc
28
Í
Í
Select a spare incident (or an existing incident if you wish to move the
marker)
ALT
and
Press the
ALT
and
SET END
keys. The time and date of the
end of the incident will added to the list
8.4 Selecting
Incidents
Up to ten incidents may be marked, and any number of these may be selected for copying onto CD.
When you have marked incidents for archiving onto CD, select which ones you wish to store onto CD:
Í
Í
Scroll through the list using the up and down cursor keys
YES
Press the
YES
key to select or de-select the incident. Selected
incidents are marked with a tick
and only these will be recorded
onto CD. Those marked with a cross
will
not
be recorded.
If the size of the selected incidents exceeds the capacity of a CD, you will have to de-select (or delete)
incidents before you can archive them to CD. If necessary, you may need to use more than one CD to store
all the incidents that you require, selection different ones before writing each CD.
Note that a single incident cannot exceed the capacity of a CD. Additionally, each incident must reside
completely on one hard drive. If the evidence you wish to archive crosses from one drive to another, you will
have to split it into two incidents.
8.5
Clearing unwanted incidents
If you wish to remove incident markers from the incident list prior to marking new ones:
INCIDENTS
View the currently marked
INCIDENTS
.
Í
Í
You may scroll through the list using the up and down cursor keys
ALT
and
Press
ALT
and
of you wish to delete the selected incident markers. This
does not delete any images, only the markers that are used for copying to CD.
8.6
Writing to CD
Having marked one or more incidents, and selected at least one, writing to CD is started by pressing the
ZERO
key (for firmware revisions prior to VDM001G4, use the Incident menu to start writing to CD).
Note that you can only write incidents to a
blank
CD. If you need to erase a CD-RW, enter “
Incident
Options”
in the “
User Menu”
select the “
Erase CD”
option and press
YES.
It is
not
possible to erase
a CD-R.
When important incidents have been written to a CD, always check that the CD plays back correctly, either
by playing it on the VDM or on a PC (see below).
Содержание VDM-16G160
Страница 2: ...Videoswitch VDM Digital Recorder Vdm601r doc ...
Страница 55: ...Videoswitch VDM Digital Recorder Vdm601r doc 49 ...
Страница 60: ......
Страница 61: ......