http://www.videopark.com.cn
Email:
82
Enter into the Router management interface; detect the port if there is already a Port mapping. If there is, it shows UPnP
setting’s finished.
The forth step
Input the IP address in IE, and add port number of the Embedded DVR, for example: 155.157.12.227:81. If you want to
enter by the Client Software, use the TCP port offered by the outer net.
Note: if there are a few embedded DVRs need to set the UPnP function, in order to avoid IP conflict, set the ports of
embedded DVR into different ports numbers. Otherwise, it will choose the embedded DVR port set preceded as the first
choice.
6.2.2.
MAMUAL PORT MAPPING
The first step
Connect th
The secon
Log in Rou
uted by the
Embedded
Default acc
the other
devices, please modify the default port of the Embedded DVR into other vacant ports.
The third step
Input the public net IP address in the IE, and add the port number of the Embedded DVR you want to access after the IP,
for example: http://155.157.12.227:81. If you want to access by Client Software, you can use the outer net TCP port
directly.
Notice: for detail configuration setting, please refer to the user manual of Router.
6.3. NTP FUNCTION
Enable NTP function; make the time synchronization with both the DVR and GPS clock server, to ensure the accuracy of
device time.