Videonics Videonics Firestore, Инструкция по эксплуатации

Страница: 27 / 59

VIDEONICS FIRESTORE PAGE 21
Chapter 5 • Playback
This chapter focuses on the different playback modes that are available
within FireStore. Playback modes include standard play, loop play, reverse
play, fast forward, fast rewind and slow playback.
Standard Play
Connect at least one FireWire hard drive and a DV device to FireStore with
their associated power supplies. Once connected, power up the DV source
followed by FireStore and the connected FireWire hard drive.
Note: If you are using a DV camcorder, VTR or mixer, it may be useful to connect an
external video monitor to that device's analog output in order to monitor what is
being recorded. FireStore does not have an analog output for monitoring.
If FireStore is ready to use, you should see the following display on the LCD
screen:
If you see the "No Disk" screen displayed (shown below), first check to see if
there is power
supplied to the disk drive and that all cable connections are
secure (see Chapter 3 for information on cabling to FireStore). If the unit still
does not respond, you may need to format your disk drive. See Chapter 8 for
details.
Note: If you are using a DV camcorder, VTR or mixer, it may be necessary to switch
that unit's input to DV Line in. Consult your User Manual for details.
In order to playback a clip, simply press FireStore's PLAY
( )
button
once. To Pause the clip, press FireStore's STOP
( )
once and a second
time to go into Stop mode.
Navigation Between Clips
To navigate to other clips, press FireStore's BACK INDEX
( )
and