Dry contact
Existing control
panel
1.4 XTENDER mode
The Videofied
®
W panel can be used as a standalone alarm system.
When fitted with the WIO100 input/outputs module, it can also be wired to an
existing alarm system
with a
programmable dry contact.
When used in XTENDER mode, the W panel can only be armed when the programmed condition for arming is met.
For example, if the XTENDER input type parameter is set as
normally open
, the system
will arm
when
the circuit
is closed
.
Opening the circuit will disarm the panel.
4
W Panel
www.videofied.com
WIO 100 Input/Outputs module
When used in XTENDER mode,
arming devices
(keypads, keyfobs, badge readers)
cannot arm or disarm the system
.
To switch between standalone mode and XTENDER mode, go to the menu :
CONFIGURATION
(Lvl 4) >
GENERAL PARAMETERS
>
XTENDER
Note :
Enabling the programmable input will automatically disable the XTENDER mode and switch the W panel in standalone
mode. In the same manner, enabling the XTENDER mode will automatically disable the programmable input.
Like when it is used as a
programmable input, the
WIO100 input used as an
XTENDER arming input can
be supervised thanks to the
two 4.7k
Ω
resistors provided
with the module.
A P P L I C A T I O N N O T E
