background image

1.  Programmable input

The programmable input is triggered by a 

dry contact

 connected to its terminals switches. 

1.1 Programmable input menu

PROGRAMMABLE 

INPUT

GENERAL 

PARAMETERS

Niv. 4

CONFIGURATION

OK 

or 

YES

OK 

or 

YES

TRANSMISSION

DISABLED

PROGRAMMABLE 

INPUT

SUPERVISION

MAPPING

DISABLED

SEND EVENT

ALARM

EVENT TYPE

INTRUSION

ENTRY DELAY

20

SIREN MODE

SIREN

INPUT NAME

INPUT 1

DETECTION NB

0

INPUT TYPE

NORMALLY OPEN

Sets if and how the input is armed

Enabled 

: 24h active input (example : panic button).

Disabled

 : Disabled input.

Only if armed

 : Input disabled when the panel is disarmed.

Alarm : the event is transmitted upon input triggering
Alarm / End : the event is transmitted upon imput triggering and on event restoral.

Normally Open : Short circuit will trigger the input.
Normally closed : Open circuit will trigger the input.

Type of event assigned to the input

 (intrusion, smoke detection, tamper, assistance 

detection, etc...).
You can find the event list on the next page.

Entry delay in seconds between the input triggering and the alarm triggering/event 
transmission.
0-3600 seconds.

Input Name. This name can be seen by the monitoring center when the input triggers. 
Choose a detailed name.

Siren type for the programmable input

Siren : the siren will be enabled and the keypad will beep.
Silent : no siren, no beeps.
Without siren : only the keypad beeps.

Links a Videofied® MotionViewer to the input. 

When the input triggers, the linked camera will record a video and transmit it to the 
security server.

Generates a welcome ring

 on the keypad and indoor siren when the input is 

triggered. For more information, please refer to the Chime Application Note.

Only displayed if the event type is Detection.

 The monitoring center assign this number to the detection type.

CHIME

PARAMETERS

SC & OC Superv. : 

Enables the programmable input supervision (open and short 

circuit).

Transmission : 

Type of transmission sent to the security server (Alarm, Alarm/End 

and Not transmitted).

2

W Panel 

www.videofied.com

WIO 100 Input/Outputs module

A P P L I C A T I O N   N O T E

Содержание WIO100








Отзывы: