25
Picture 4.30 Channel type
2. In channel type list, there are many channel type combinations available (as picture 4.30)
In digital channels, the numbers under resolutions means the maximum IP camera or other
network device channels which can be connected under that resolution. Customers can
choose any of the combination according to their requirement. Click “OK” to finish channel
type shift. The settings will be applied after restarting the device.
4.5.2
【
RemoteDevice
】
Picture 4.31 Remote Device
Used to bind signals of the channels where video input type is digital network HD signal as
illustrated in picture 4.31.
Network configuration list:
click on search to see the list of networks which are added in
the device, type, IP address, remote channel information of the particular channel, etc.
Protocol:
Use ONVIF&NETIP protocol for searching IP device on LAN.
Search: Search IP Device on LAN.
26
Add:
add new IP device for this NVR channel, there are 3 ways for adding IP address;
a. Click“ + ” on any channel to search the IP device and add it
b. Click “Add” in “Online Equipment”
c. Click “ + ” for related device to add IP device in “Online Equipment”
One key add
:
Automatic add device by LAN IP, the IP address priority added by the
last digit Modify IP:
Change the IP device IP address when it had been searched. as
picture 4.32
Click“ ”to enter.
Picture 4.32 Modify IP
Picture 4.33 Remote access configuration
Added device:
displays added device in the device.
Manual Add:
manual enter device’s IP, user name, password, protocol and IP port.
Edit:
Click“ ”to enter Remote access configuration, can change IPC parameters.
(as picture 4.33)
Device Information:
display remote IP device’s system version, release date, series
number.
System Time
:
Modify remote IP device’s time.
Remote restart
can restart remote IP device via local operation
Default:
Restore remote IP device’s parameters.
Video encode:
can change IP device’s stream, compression, frame rate, quality and so
on as illustrated in picture
4.34
.
Image color
:
can change remote IP device’s color
