Videocon MS901K-AP, Руководство по обслуживанию, Страница: 25 / 43

Factory Test & Alignment Specification For MS801-AP Series (V1.0)
Page 16 of 17
data-base .so that the data is verified .
Appendix
 ”NETWORK
CONNECTION AND TEST”
1.Network connection
You can set up your TV so that it can access the Internet through your local area network (LAN)
using a wired or wireless connection.
1.1Connecting to a wired network
You can attach your TV to your LAN using cable in three ways:
• You can atta
ch your TV to your LAN by connecting the LAN port on your TV to an external modem
using a Cat 5 cable.
• You can attach your TV to your LAN by connecting the LAN port on your TV to a IP Sharer which is
connected to an external modem. Use Cat 5 cable for the connection.
• Depending on how your network is configured, you may be able to attach your TV to your LAN by
connecting the LAN port on your TV directly to a network wall outlet using a Cat 5 cable. Note that the
wall outlet is attached to a modem or router elsewhere in your house.
Select
System Settings-> Network Settings-> Wired Setting , then select
“
Auto Get IP Address
”
or
“
Manual Set IP Address
”
to connect to a wired network.
1.2 Connecting to a wireless network
To connect your TV to your network wirelessly, you need a wireless router or modem and a Wireless
LAN Adapter.
1.2.1 Select Settings-> Network Settings-> Wireless Settings , then turn on Wireless Switch ,
select a wireless network and press OK to connect.
1.2.2 Connect your Wireless High Gain USB Adapter (USB dongle) delivered with your TV to your
TV’s
USB port. Select Settings-> Network Settings-> Wireless Settings , then turn on Wireless
Switch and External Wifi , and select a wireless network and press OK to connect.
Appendix

“Instructions of Updating SW”
1. The following IC should be pre-copied before SMT process
Positon Part Number SW