Videocon MS901K-AP, Руководство по обслуживанию, Страница: 14 / 43

Factory Test & Alignment Specification For MS801-AP Series (V1.0)
Page 5 of 17
In case of “
Design mode hotkey
” is
enabled, press
“
Return
”
to enter Main Menu . To modify
Project ID, you need to go through
“
Service menu

Project ID
”,
then press Left or Right key to
select suitable ID (Project name is dynamically refreshed).
See Appendix

“How to change Project ID with RCU”
Here below is none exhaustive ProjectID table for reference:
MODEL ProjectID Panel Name
TCL No. Clientype
L49E5700UDS 124 MT4851D01-1 4A-LD49E5-CS1STA
1.4. Functional Test
Once the boards (chassis, KB, IR, PSU
…)
and the panel are well interconnected, plug all
external generator devices to relevant inputs/outputs below according to their respective test patterns
format and check picture content and sound quality accordingly:
Source Test Signal Test Pattern
Analog Tuner
(VHF/UHF)
RF cable generator
1. Frequency Range: full band
2. Standard: PAL DK/BG/I
、
NTSC M
、
SECAM DK/BG
SPDIF
(copatial)
Suitable signal --
AV1 via mini jack adaptor
(CVBS&Audio)
Chroma/Fluke
generator
PAL Half Color & Gray bars
AV2
(CVBS&Audio)
Chroma/Fluke
generator
PAL Half Color & Gray bars
VGA
(VGA&Audio)
Chroma/QuantumData
generator
1024x768@60Hz
Half Color & Gray bars
CMP
(YPrPb & Audio)
Chroma/QuantumData
generator
1080i@60Hz
Half Color & Gray bars
HDMI
(Video & Audio)
DVD with HDMI
compliancy
Movie 720p@60Hz
LAN
(RJ45)
Ethernet Any network
AV OUT via mini jack adaptor
(Video & Audio)
RF signal Suitable channel
Audio tones can be defined by the factory (ie: 1KHz & 3KHz, sweep, …).
Picture video formats can be changed by the factory according to their own standard.
See Appendix

“3D Format Availability vs Source Matrix”
1.5. AD Calibration Test