I N S T A L L A T I O N
9
Connect the LAN Port
T
If you have a hard line internet connection available, you can connect to it directly with
a CAT-5 Ethernet cable to the
T
LAN Port.
Connect the USB Card Reader
C
Connect the USB card reader remote receiver into any available USB port. You may
wish to connect this in the front
C
USB ports for easy access, and store it away when
it’s not in use to minimize clutter.
Connect the Wireless USB
Networking Module
I
(Optional)
Simply stick the wireless module into any available USB port. For optimum
connection, you can use the included USB extension cords to connect it to the back
I
USB Ports, so that it is hidden.
Connect the HDTV Over-the-air
Antenna
Y
(Optional)
If you purchased a HDTV model, connect your HDTV over-the-air antenna to the
Y
HDTV Antenna In port at the rear of the VidaBox.
If there are two HDTV antenna inputs on your unit, an additional set of two short
coaxial cables and a splitter have been included so you can split the incoming signal.
Connecting the incoming cable to the
In
port of the 1-to-2 splitter, and connect your
HDTV Tuner’s inputs to the
Out
ports of the splitter with the short coaxial cables.
* - All pictures shown are for illustration purposes only. Actual product appearance
may vary.
USB Card Reader
Wireless / WiFi module
CAT-5 Ethernet Cable
HDTV-OTA Antenna
1-to-2 coaxial splitter
