1. Introduction
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would
damage the battery) or before it has insufficient power left to crank the engine.
It also provides an alternative to disable chargers without a remote on/off port to protect from over-voltage.
Compared to the BatteryProtect, the Smart BatteryProtect can be conveniently programmed via Bluetooth and our
VictronConnect app or the PROG pin to GND pin method. All necessary parameters can be set in this way.
The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or
current from a charger, but not both currents at the same time. In addition to this, current can only flow from the IN terminal to the
OUT terminal.
Smart BatteryProtect 12/24V
Page 1
Introduction