Victron energy Phoenix Inverter Smart, Руководство пользователя

Страница: 5 / 27

For more information about the app and to download the app see the VictronConnect product page .
2.4. Bluetooth
The inverter has built-in Bluetooth.
Bluetooth (but also a VE.Direct connection) can be used to communicate with the VictronConnect app.
2.5. VE.Direct port
The inverter is equipped with a VE.Direct port. This port can be used to connect the inverter to:
• The VictronConnect app via a VE.Direct to USB interface .
• The VictronConnect app via a VE.Direct Bluetooth Smart dongle .
• A GX monitoring device, such as the Cerbo GX . Note that an additional VE.Direct cable is needed for this.
• The GlobalLink 520 . Note that an additional VE.Direct cable is needed for this.
2.6. Remote on/off control
The inverter can be remotely turned on or off in the following ways:
• Via the VictronConnect app.
• With an (optional) external switch connected to the remote connector.
• With the (optional) Phoenix Inverter Control VE.Direct panel connected to the remote connector.
• From a BMS (Battery Management System) connected to the remote connector.
• Via a GX device and/or the VRM portal (optional).
For more information see the Remote connector [6] chapter.
2.7. Programmable relay
The inverter is equipped with a programmable relay. This relay can be used, for example, to interact with an external monitoring
or alarm system or drive an extraction fan.
For more information see the Programmable relay [6] chapter.
Phoenix Inverter Smart Manual
Page 3 General description