Victron energy ORI303100000, Руководство пользователя

Страница: 13 / 76

11
EN
NL
FR
DE
SE
RU
A
ppendi
x
CAN-bus Temp Sensor
The CAN-bus Temp Sensor is an accessory that is specially developed for all types of Buck-Boost converter.
The temperature is transmitted to the converter via the CAN-bus communication ports by means of a communication
cable. The CAN-bus Temp Sensor can also be used in combination with any Victron Multi or Quattro. This enables the
charging voltage to be regulated if the temperature is too low.
In LiFePO4 lithium systems, this sensor is needed in many system applications, because LiFePO4 batteries must not be
charged up when they are too cold. Charging lithium batteries when they are near or below freezing point will cause
permanent damage to the cells.
The CAN-bus Temp Sensor is a Buck-Boost accessory and must be ordered separately.
The 25A does not have a CAN connection, which means that the CAN-bus Temp Sensor cannot be used.
Wiring diagram
Starter Battery
50A
100A