Victron energy BMS, Руководство пользователя

Страница: 35 / 40

2020-11-09 21:12 35/40 ECOmulti installation Hub-2
Victron Energy - https://www.victronenergy.com/live/
As last Step you could check the firmware of the ECOmulti:
Configure CCGX
The ColorControl GX (Firmware 1.14) must be configured now:
Remove the MK2USB programming cable (grey) from the VE.Bus input, if not done already
Connect the CCGX VE.Bus cable (blue) to the mainboard.
Switch on 230VAC mains and loads
Connect a permanent UTP cable from the CCGX to your Internet router. The router must be
configured for DHCP. The CCGX will receive an IP address from the router.
Configure the CCGX:
​​
Click on cursor left button and select “Settings”