Victron energy BlueSolar SCC010005000, Руководство пользователя

Страница: 98 / 122

The table below shows the list of battery related parameters that can be modified.
Parameter
Default
setting
Battery type Gel
Sealed
(AGM)
Flooded User defined
Battery capacity (Ah) 200Ah 1~9999
Temperature compensation coefficient -3mV/°C per 2V cell 0~9
Rated voltage (system voltage) Auto 12V/24V
Over voltage load disconnect 16.0V 9~17V
Charge limit (highest charge voltage
including temp. compensation)
15.0V 9~17V
Over voltage load reconnect 15.0V 9~17V
Equalize charge —— 14.6V 14.8V 9~17V
Boost charge (absorption charge) 14.2V 14.4V 14.6V 9~17V
Float charge 13.8V 13.8V 13.8V 9~17V
Boost trigger voltage (starts new
charge cycle)
13.2V 9~17V
Low voltage load reconnect 12.6V 9~17V
Under voltage warning reset 12.2V 9~17V
Under voltage warning 12.0V 9~17V
Low voltage load disconnect
(nominal value at 25°C)
11.1V 9~17V
Discharge limit (lowest low voltage
load disconnect including temp.
compensation)
10.6V 9~17V
Equalize duration —— 2 hrs. 2 hrs. 0~3 hrs.
Boost/absorption duration 2 hrs. 2 hrs. 2 hrs. 0~3 hrs.
Multiply voltages by 2 for a 24V system
Press “Read” to see the current settings
Press “Update” to save the (modified) settings
Press “Export Settings” to save settings in a file for later use in another controller
Press “Import Settings” to restore the saved settings or import saved settings into another controller
[Load Configuration]
Configuration of the Load output