Victory BX32, Руководство оператора

Страница: 28 / 64

8. Connect the hydraulics:
a. Use a clean rag or paper towel to clean
the dirt from couplers on the hose ends
and the tractor.
b. Connect the hoses to the tractor cou-
plers. Be sure the couplers are secure-
ly seated.
c. Route and secure the hoses along the
hitch with clips, tape or plastic ties to
prevent binding and pinching. Be sure
to provide slack for turning.
NOTE
Always connect to the
hydraulic circuit with a
detent.
9. Slowly raise the machine through its work-
ing range to make sure the telescoping
portion of the PTO shaft doesn't bottom out.
10. Level the machine front and rear, and side
to side using the jackscrew on the right
arm and the turnbuckle on the top link.
The chipper should always be level on
the ground in its working position.
11. To unhook from the tractor, reverse the
above procedure. Always park the ma-
chine in a dry, level area. If vandalism is
a problem, remove the PTO driveline and
store in a secure place.
Fig. 18 HYDRAULICS
Fig. 1 9 LEVELLING ADJUSTMENTS