Victorinox HUNTER MACH 2 Скачать руководство пользователя страница 11

Страница: 11 / 86

- 9 -

SETTING THE TIME

• Pull out the crown to position 3. The second hand now stops.
• Turn the crown to pre-position the hour and minute hands to the

desired time.

• Push the crown back into its normal position (1). The watch

will begin to run again instantly.

SETTING THE DATE

• Pull out the crown to position 2.
• Rotate the crown away from you advancing the hour hand until

the date showing is the day before the desired setting.

• Pull out the crown to position 3 and rotate away from you.

When midnight is reached, the date will advance to the desired
date. Continue to turn the crown until the desired time is set.
Remember, the date advances at 12:00 midnight, not 12:00 noon.

• Push in the crown, returning it to position 1. The date and time are now set.

NOTE:

You must always push in and screw down the crown to form a

water resistant seal with the case. Never operate the crown when the
watch is wet.

Содержание HUNTER MACH 2























































































Результаты поиска

Содержание HUNTER MACH 2

Отзывы:

Похожие инструкции для HUNTER MACH 2

Бренды по названию

Популярные бренды

Victorinox HUNTER MACH 2, Руководство пользователя

Результаты поиска

Содержание HUNTER MACH 2

Отзывы:

Похожие инструкции для HUNTER MACH 2

Бренды по названию

Популярные бренды