Victorinox HUNTER MACH 2 Скачать руководство пользователя страница 17

Страница: 17 / 86

- 15 -

Manual Winding

• Leaving the crown in position 1, wind the watch by turning it away

from you until fully wound (approximately 20 times). Do not overwind.
The watch will run continuously for approximately 56 hours.

NOTE:

This operation should be done consistently every day at

the same time (for example, every morning or evening).

Setting the Time

• Pull out the crown to the fully extended position and rotate toward

you until the desired time is set.

• Push the crown back in to its normal position. The time is now set.

NOTE:

You must always push in and screw down the crown to form a

water resistant seal with the case. Never operate the crown when the
watch is wet.

Содержание HUNTER MACH 2























































































Результаты поиска

Содержание HUNTER MACH 2

Отзывы:

Похожие инструкции для HUNTER MACH 2

Бренды по названию

Популярные бренды

Victorinox HUNTER MACH 2, Руководство пользователя

Результаты поиска

Содержание HUNTER MACH 2

Отзывы:

Похожие инструкции для HUNTER MACH 2

Бренды по названию

Популярные бренды