background image

Digital Timer

H5AN

DIN-sized (72 x 72 mm) Quartz Timer with 
Multiple Functions

• Wide time range from 1/100 seconds to 9999 hrs.

• Built-in power supply incorporated in timer enables direct 

connection of sensors and other components.

• Draw-out construction allows maintenance without 

disconnecting the wiring.

• Power supply freely selectable within a range of 100 to 240 

VAC; a DC-operated version is also available.

• Control outputs of both contact type and solid-state type 

simultaneously available.

• Seven operating modes (N, F, C, R, K, P, and Q) are available.

Ordering Information

Note: 1.

Specify both the model number and supply voltage when ordering.

2.

The Timer is supplied with two mounting fixtures.

Operation system

Resetting system

No. of digits

Backup power supply 

function for memory 

protection

Model

Time-limit operation, 
integrating operation

Power-OFF resetting 
(excluding -M), 
external resetting, 
manual resetting, automatic 
resetting

4 digits (switch-selectable):
0.01 to 99.99 s, 0.1 to 999.9 s, 1 to 9999 s, 0.1 
to 999.9 min, 0.1 to 999.9 hrs, 1 to 9999 hrs, 
1 s to 99 min 59 s, 1 min to 99 hrs 59 min

Not provided

H5AN-4D

Provided (approx. 
10 years at 20

°

C)

H5AN-4DM

http://www.ia.omron.com/

1

(c)Copyright OMRON Corporation 2008   All Rights Reserved. 

Содержание H5AN Series

















Отзывы: