20
i)
Blind hem
Fold
the material as shown. Make
the fold as wide as you want the fin-
ished seam to be: the bottom fold
should be about 5 mm away.
Use the
blind hem foot
. While
sewing, check the seam width and
needle setting, to ensure that the
seam remains uniform.
Sew
the blind seam on the underside
of the material, so that only the peak
of the zigzag stitch pierces the out-
side of the material. When you have
finished sewing, push the left of the
material over to the right and smooth
out. The seam is almost invisible!
The
table
below shows the suggested
settings for the various values, depend-
ing on the material used.
IB_Sewingmachine_content_UK.qxd 22.07.2004 12:21 Uhr Seite 20
