4
measured point and make sure there are no signals on
the input end.
5. During the electric measurement, never directly touch
the ground or touch naked metal terminals, output
ports, lead clamps, etc that may have ground
potential.
6. Do not store and use the meter in the environment of
high temperature, high humidity, high flammability,
high explosion potential and strong magnetic field.
7. Measuring the voltage out of the allowed limit
voltage may damage the meter and endanger the
operator. The allowed limit voltage is marked on the
panel of the meter. Never measure the input signal
out of this standard in order to prevent electric shock
and damage on the meter.
8. Do not attempt to calibrate or repair this meter.
Surely, when necessary, the calibration and repair
must be conducted by specially trained personnel or
qualified professional personnel.
9. During measurement, the function/range selection
switch must be placed at the correct range gear.
When converting the function/range selection switch,
Содержание 6056B
Страница 1: ...User s Manual of Digital Clamp Multimeter...