Electric Weed Burner
11253
Instructions for Use
Please read and retain these instructions for future reference
v003: 25/06/19
Operation
Always use with caution! Do not cover the ventilation openings during use as it causes a risk of
burns! Do not touch the hot outlet!
Temperature settings
With the temperature switch (1) you can select from two temperature settings.
230V
240V
Setting I
50°C (venting/cooling)
78
Setting II
600°C
635-724°C
The volume of air on either setting is 500 l /min.
To turn on the power
•
Push the switch (1) in position I or position II.
To turn off the appliance
•
Push the switch on position 0.
To install the outlet
The outlet can easily be pushed over the hot air outlet. Never touch the outlet during or immediately after
use of the device. It is very hot.
Always fit and secure the outlet before use!
INSTRUCTIONS FOR USE
Assemble the extension handle:
The extension handle consists of two parts. Connect both parts and attach the extension handle to the
device. To attach the extension handle, place the extension handle in the machine and turn it a quarter
turn to the right. Make sure that the extension handle firmly clicks into position. Once assembled the
extension handle connection and extension handle cannot be separated.
You must use the extension handle. Hold the weed burner firmly by holding the end of the
extension handle.
Ensure that the device is turned off.
•
Install the outlet (9) to destroy weeds.
•
Insert the plug into the socket.
•
Check to ensure the outlet is not blocked before turning the device on.
•
Set the temperature to setting II.
•
Allow the device about 45 seconds to warm up.
•
To eliminate weeds, hold the outlet over the weeds and slowly rotate around the weed for about 3
seconds. During these 3 seconds the cell structure of the weed is destroyed. As a result, the weed dies
within a few days. For best results hold the weed burner above the weed and lower until it is about
5mm from ground. Do not point the weed burner on the same area for extended period of time due to
fire risk.
•
It is not necessary to completely burn the weeds, 3 seconds is more than sufficient.