19
2 in 1 Aerator & Scarifier
H466 OR
Instructions for Use
Please read and retain these instructions for future reference v001: 25/09/20
Page No. 19
Switching ON/OFF (FIG. 8)
Switch on:
press the button on the combined switch/plug. Hold down the on Button ① and
pull the switch bar ② towards the handle and hold in position
The safety button ① does lock into position. (FIG. 8)
Switch off: release the switch bar.
Note:
While mowing, lay the connection cable safely on footpaths and on areas which have
already been mowed.
WARNING!
When the motor has been switched off, the cutter continues running for several seconds
therefore do not touch the underside of the mower until the cutter has come to a
standstill!
Warning:
Do not attempt to operate your machine with one hand – you must guide it with
both hands. Do not operate your machine on sanded, concrete or wooden ground.
• Tilt the handle downwards to slightly raise the front of your unit and to reduce the risk of
lawn damage while starting, depress the safely lock-off button ①) on the switch box and
while still depressed pull the switch bar ② towards you.
(FIG. 8) and lower your machine to its proper cutting position, and commence cutting.
• Proceed down the cutting area as shown in Fig. 9.1, working from position 1 towards
position 2 and, on reaching position 2, turn to the right and proceed towards position 3.
Continue to the end of the cutting area, turn to the left and proceed towards position 4.
Continue in the same manner as shown in Fig. 9. 1, always working away from the cable. Do
not adopt the method as shown in Fig. 9. 2, working towards the cable, as this is dangerous
practice.
Setting the Working Depth
The working depth is adjustable to 5 heights referring to below table. FIG 5
