VictelGlobal AK-861-4T, Руководство по обслуживанию

Страница: 7 / 31

Service Manual
6
functioning as a standby power supply; In case of power module failure/power
cut-off, the standby power is used. When connecting the standby power, take care
to the polarity of power supply.
5. Amplifier output port: the amplifier power output port of base station.
Maximum power output: 45~50W.
6. IP port: used for IP networking. It applies the international standard line
sequence.
7. TX&RX module port: input port of receiving signals.
8. ANT port: antenna interface
9. Low end of the duplexer: input/output port of low frequency signals
10. High end of the duplexer: input/output port of high frequency signals
Note: Locations of the above ports are subject to changes. If there is any
inconsistency of port sequence in the actual product you receive, the actual product
will govern.