VictelGlobal AK-861-4T, Руководство по обслуживанию

Страница: 16 / 31

Service Manual
15
Choose inter Frequency
 Press the knob to enter “Choose inter Freq”.
 Transceiver can save 16 inter frequencies, which are available for all
operating modes. Num 1 ～ 16 stands for inter frequency, while Num 0
stands for the current frequency. If you accidentally enter into this menu
item, please choose the 0 number so that the frequency will not be changed.
Change Frequency
 Press the knob to enter “Change Frequency”.
 Firstly, choose that way of frequency. If the Way is “CCM”, that means only
CCM will control frequency and manual adjustment will not be valid. If you
need to adjust, please change the Way to “PC”.
 Put the cursor at the frequency frame behind “TX Freq” and press the knob.
Start from the highest digit and change the number by rotating the knob.
Once finish the highest one then can change the next digit number. If you
finish changing the TX frequency, put the cursor to “RX Freq” and change
in the same way.
Adjust Power
 Press the knob to enter “Adjust Power”.
 The power displayed in the entry page is the current power value. Rotate the
knob clockwise to lower down power and anticlockwise to add up power.
Note：Whileoperatingpleasedonotchoose“--W”,whichisaspecialitem
forpowerstandardizing；Ifthisitemischosen,thepowerwillnotbefixedata
certainvalue,whichwillaffectthefunctionoflowpowerwarning.