VictelGlobal AK-861-4T, Руководство по обслуживанию

Страница: 13 / 31

Service Manual
12
* The cooling fan rotates 1-2 seconds before it stops, and the the display shows
channel information.
Power off
：
* Press the power switch at the back of the base station
（
Fig.2-
② ） ，
the power
indicator goes out.
* The display shuts down.
Note
：
Be sure to cut off the power supply completely if the equipment won’t
be used for a long time. And please keep it in a dry environment free of dust.
Menu Item Operation
Switch Mode
 Press the button, move cursor to Switch Mode item. You can adjust
operating modes according to three different combination “Trunk/Convt”,
“ Digital/Analog ” , “ DMR/PDT ” .
 After moving the cursor to the corresponding item, press “Back” to exit the
setting interface and back to the main item; or press “Exit” to go back to the
main interface and enable the new setting.
Note: The moment when the base station is powered on, the cooling fan
rotates 1 ‐ 2 seconds and then stop, so you can see whether the fan works
normally.