VE46 Pipe Roll Grooving Tool
5
INTRODUCTION
The Victaulic VE46 Roll Grooving Tool series
is designed for roll grooving pipe to receive
Victaulic grooved pipe products and can be
used for either manual or power operation.
RECEIVING THE TOOL
VE46 tools are packed individually in sturdy
containers, which are designed for use in re-
shipping tools back to Victaulic upon comple-
tion of the rental contract, when applicable.
Upon receipt of the tool, make sure all neces-
sary parts are included. If any parts are miss-
ing, notify the Victaulic Tool Company.
VE46 CONTAINER
CONTENTS
OPTIONAL POWER DRIVE KIT
CONTENTS*
NOTICE
• Drawings and/or pictures in this manual may be
exaggerated for clarity.
• The tool, along with this operating and maintenance
instructions manual, contains trademarks, copy-
rights, and/or patented features that are the exclu-
sive property of Victaulic Company.
CAUTION
• This tool must be used ONLY for roll grooving pipe
designated in the “Tool Rating” section of this
manual.
Failure to follow this instruction could overload the
tool, resulting in reduced tool life and/or damage to
the tool.
Qty.
Description
1
VE46 Tool (VE46S or VE46P Version, as
Ordered)
1
Set of Groove Depth Gauges (Attached to
Tool)
1
Hand Crank
2
VE46 Operating and Maintenance
Instructions Manual
1
RP-VE46 Repair Parts List
Qty.
Description
1
Power Drive Mounting Plate
1
Drive Shaft/Adapter
1
Hex-Head Bolt
1
Hex Nut with Nylon Insert
2
Hex-Head Cap Screw
2
Lock Washer
2
Hex Nut
* Kit Part Number (R-075-026-KIT)
TM-VE46 1924 Rev_B.fm Page 5 Wednesday, January 19, 2005 8:59 AM
