VE46 Pipe Roll Grooving Tool
11
2d.
Adequate clearance around the tool for
adjustment and maintenance
3.
Make sure the hardware is tightened to
secure the power drive to the power drive
stand.
4.
Extend the two tubular support arms to
their full extension beyond the chuck of the
power drive.
4a.
Secure the two tubular support arms in
position. Refer to the power drive manu-
facturer’s instructions.
5.
Open the chuck of the power drive fully.
Refer to the power drive manufacturer’s in-
structions.
6.
Refer to the "Preparation for Grooving"
section, starting on page 13, to install the
power drive mounting plate onto the VE46
tool.
NOTICE
• The cutoff attachments, threading dies, and reamer
station do not need to be removed from the power
drive. Refer to the photo shown below.
TM-VE46 1924 Rev_B.fm Page 11 Wednesday, January 19, 2005 8:59 AM
