VAPS 224 Pipe Stand
9
MAINTENANCE
This section provides information about keep-
ing the pipe stand in proper operating condi-
tion and guidance for making repairs when it
becomes necessary. Preventive maintenance
during operation will pay for itself in repair and
operating savings.
Replacement parts must be ordered from
Victaulic Tool Company to ensure proper and
safe operation of the tool.
LUBRICATION
1.
Regular lubrication is required for the
VAPS224 pipe stand. On a weekly basis,
apply a few drops of light oil to the ball trans-
fer units. Work the oil in by rotating the units.
2.
2. On a monthly basis, apply grease to
the grease fitting on top of the table, as shown
above, with a #2EP Lithium base grease.
PARTS ORDERING
INFORMATION
When ordering parts, the following information
is required for the Victaulic Tool Company to
process the order and send the correct
part(s). Request the RP-VAPS224 Repair
Parts List for detailed drawings and parts
listings.
1.
Tool Model Number – VAPS224
2.
Tool Serial Number – The serial number
is stamped onto a plate located on the ball
transfer support.
3.
Quantity, Part Number, and Description
– For example: (1), NM28000002, Ball Trans-
fer
4.
Where to Send the Part(s) – Company
name and address
5.
To Whose Attention to Send the Part(s)
6.
Purchase Order Number
Order parts by calling 1-800-PICKVIC.
TM-VAPS224 0149 Rev_B.fm Page 9 Tuesday, May 31, 2005 8:20 AM
