2
VAPS 224 Pipe Stand
OPERATOR SAFETY INSTRUCTIONS
The VAPS224 is designed only for supporting
pipe to be roll grooved. Use of this pipe stand
requires dexterity and mechanical skills, as
well as sound safety habits. Although this
pipe stand is manufactured for safe, depend-
able operation, it is impossible to anticipate
the combinations of circumstances that could
result in an accident. The following instruc-
tions are recommended for safe operation of
this pipe stand. The operator is cautioned to
always practice “safety first” during each
phase of use, including setup and mainte-
nance. It is the responsibility of the owner,
lessee, or user of this pipe stand to ensure
that all operators read this manual and are
fully trained to operate this pipe stand.
Read this manual before operating or servic-
ing this pipe stand. Become familiar with the
pipe stand’s operations, applications, and
limitations. Be particularly aware of its specific
hazards. Store this manual in a clean area
where it is always readily available. Additional
copies of this manual are available upon
request through the Victaulic Tool Company.
GENERAL
1.
Avoid dangerous environments.
Keep
work area well lit. Allow sufficient space to
operate tool and accessories properly and for
others to pass safely.
2.
This pipe stand is designed ONLY for
supporting pipe to be roll grooved for pipe
sizes, materials, and wall thicknesses list-
ed in the "Tool Ratings" section on
page 11.
3.
Inspect the equipment.
Before using
the pipe stand, check all moveable parts for
any obstructions. Make sure all guards and
pipe stand components are installed and
secured properly.
4.
Wear proper apparel.
Do not wear loose
clothing, jewelry, or anything that can become
entangled in moving parts.
5.
Wear protective items when working
with tools.
Always wear safety glasses,
hardhat, foot protection, and hearing protec-
tion.
6.
Stay alert.
Do not operate the tool if you
are drowsy from medication or fatigue. Avoid
horseplay around the equipment.
7.
Keep visitors away from the immedi-
ate work area.
All visitors should be kept a
safe distance from the equipment at all times.
When using the pipe stand at elevated
locations, the area below must remain
clear of other personnel.
8.
Keep work areas clean.
Keep the work
area around the pipe stand clear of any
obstructions that could limit the movement of
the operator. Clean up any oil or other spills.
9.
Do not overreach.
Keep your proper
footing and balance at all times. Do not reach
across the tool or pipe.
10.
Keep hands and tools away from
grooving rolls during the grooving opera-
tion.
Grooving rolls can crush or cut fingers
and hands.
11.
Do not reach inside the pipe end
during tool operation.
12.
Do not force the tool.
Do not force the
tool or accessories to perform any functions
beyond their capabilities. Do not overload the
tool.
13.
Maintain tools with care.
Keep tools
clean at all times to ensure proper and safe
performance. Follow the instructions for lubri-
cating tool components.
14.
When tools are not is use, store them
in a dry, secure place.
15.
Use only Victaulic replacement parts
and accessories.
Use of any other parts may
result in a voided warranty, improper opera-
tion, and hazardous situations. Refer to the
"Parts Ordering Information" section on
page 9.
16.
Do not remove any labels from the
pipe stand.
Replace any damaged or worn
labels.
TM-VAPS224 0149 Rev_B.fm Page 2 Tuesday, May 31, 2005 8:20 AM
