UPPER ROLL REMOVAL
WARNING
• Always disconnect the tool from the
electrical source before making any tool
adjustments.
Accidental startup of tool may result in
serious personal injury.
Hydraulic
Pump
Valve
1.
Open the hydraulic pump valve by turning the
knob counterclockwise . This will raise the slide
and upper roll to their highest positions .
2.
Loosen the upper shaft retaining screw . It is
not necessary to completely remove the screw .
3.
While supporting the upper roll, remove the
upper shaft from the slide/upper roll holder by
pulling it straight outward . Remove the upper
roll, and store it in a safe location for future use .
17
REV_A
TM-RG3212
/ Operating and Maintenance Instructions Manual
