3
10.
Install the remaining standard bolts
through the Vic-Flange and the mating
flange. Install all nuts until they are
finger-tight.
11.
Tighten all nuts evenly in a crossing
pattern, as with a regular flange assem-
bly. Continue to tighten all nuts until
the standard, flange-joint torque recom-
mendation is achieved.
Installation Instructions
This product shall be manufactured by Victaulic Company. All products to be installed in accordance with current Victaulic installation/assembly instructions.
Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations.