2. Ground the power drive to protect the
operator from electric shock.
Verify
that the power drive is connected to an
internally grounded electrical source .
3. Disconnect the power cord from the
electrical source before servicing the
tool.
Only authorized personnel should
perform maintenance on the tool . Always
disconnect the power cord from the
electrical source before servicing or
adjusting the tool .
WARNING
1. Prevent back injury.
Always use proper
lifting techniques when handling tool
components .
2. Wear proper apparel.
Do not wear loose
clothing, gloves, jewelry, or anything that
can become entangled in moving parts .
3. Wear protective items when working with
tools.
Always wear safety glasses, hardhat,
foot protection, and hearing protection
(sound levels up to 99 decibels can be
produced during the grooving process) .
4. Keep hands and tools away from the
power drive chuck and carriage edges
during grooving operation.
Rotation of the
power drive can pinch or entangle fingers
and hands .
5. Do not reach inside pipe ends during tool
operation.
Pipe edges can be sharp and
can snag hands and shirt sleeves .
6. Operate the tool only with a safety foot
switch.
The power drive must be operated
with a safety foot switch that is located for
easy operator access . Never reach across
moving parts . If the tool does not contain a
safety foot switch, contact Victaulic .
7. Do not over-reach.
Maintain proper balance
at all times . Verify that the safety foot switch
is easily accessible to the operator .
8. Do not make any modifications to the
tool.
Do not remove any safety guarding
or any components that would affect tool
performance .
CAUTION
1. RG2910 tools are designed ONLY for
grooving pipe sizes, materials, and wall
thicknesses as designated.
2. Inspect the equipment.
Before using
the tool, check moveable parts for
obstructions . Ensure that tool components
are installed and adjusted in accordance
with setup instructions .
3. Stay alert.
Do not operate the tool if you
are drowsy from medication or fatigue .
4. Keep visitors, trainees, and observers
away from the immediate work area.
All
visitors should be kept a safe distance from
the equipment at all times .
5. Keep work areas clean.
Keep the
work area around the tool clear of any
obstructions that could limit movement of
the operator . Clean up any spills .
6. Secure the work, tool, and accessories.
Verify that the tool is stable . Refer to the
“Tool Setup” section .
7. Support the work.
Support long pipe lengths
with a pipe stand .
8. Do not force the tool.
Do not force the tool
or accessories to perform any functions
beyond the capabilities described in these
instructions . Do not overload the tool .
9. Maintain tool with care.
Keep the
tool clean to ensure proper and safe
performance . Follow the instructions for
matching and lubricating tool components,
if applicable .
10. Use only Victaulic replacement parts
and accessories
. Use of any other parts
may result in a voided warranty, improper
operation, and hazardous situations . Refer
to the “Parts Ordering Information” section .
11. Do not remove any labels from the tool.
Replace any damaged or worn labels .
5
REV_C
TM-RG2910
/ Operating and Maintenance Instructions Manual
Содержание RG2910
Страница 2: ......
