Victa VRX Series Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 44

Victa VRX Series Скачать руководство пользователя страница 7

Not for

Reproduction

4

1.4 REGULATIONS FOR TOWING

A kit for towing a small trailer is supplied on some models.
This accessory is to be fitted following the instructions
provided.
When using the towing kit, do not exceed the
recommended loads stated on the label & follow the safety
instructions (

1.2, C-6).

1

Warning:

Read the instructions before operating this machine.

2A

Danger! Ejected objects:

Do not operate without the stone-guard in place.

(Side discharge models only)

Danger! Ejected objects:

Do not operate without either the rear discharge guard or the

grass-catcher being in place. (Rear catch models only)

3

Danger! Ejected objects:

Keep bystanders away.

4

Warning

:

Disconnect the ignition key and read the instructions before carrying out any

repair or maintenance work.

5

Danger! Machine rollover:

Do not use this machine on slopes steeper then 10°.

6

Danger! Dismemberment:

Make sure that children stay clear of the machine at all time

when engine is running.

Danger of cutting yourself.

Blades in movement.

Do not put hands or feet near or under the opening of the cutting plate.

Warning!

-

Keep away from hot surfaces.

max 245 N (25 kg)

max 980 N (100 kg)

1.3 SAFETY LABELS

Your machine must be used with care. This is why labels with illustrations have
been placed on the machine, to remind you of the main precautions to take during
use.

These labels are to be considered an integral part of the machine.

Should a label come off or become illegible, contact your dealer to replace it.
Their meaning is explained below.

1

2A

3

4

5

6

1

2A

3

4

5

6

1

2A

3

4

5

6

1

2A

3

4

5

6

1

2A

3

4

5

6

7

8

7

8

2B

2B

7

8

1

2A

3

4

5

6

«
...
5
6
7
8
9
...
»

Содержание VRX Series













































Отзывы:

Нет отзывов