Victa VRX Series, Руководство оператора, Страница: 25 / 44

Not for
Reproduction
22
Gradually reach the desired speed using the throttle and gear lever. To change
gear, press the clutch halfway down (
4.21).
Hydrostatic transmission
Disengage the parking brake and release the brake pedal ( 4.31).
Press the drive pedal ( 4.32) in direction «F» and reach the required speed by
progressively increasing pressure on the pedal and moving the accelerator.
WARNING!
Drive must be engaged as de scribed ( 4.32) ) to
prevent sudden engagement from causing tipping up and loss of control of
the vehicle, particularly on slopes.
5.4.3 Braking
First reduce the machine’s speed by reducing the engine’s r.p.m., and then press
the brake pedal (
4.21 or 4.31) to slow down the machine until it stops.
Hydrostatic transmission
The machine already slows down considerably by just releasing the drive pedal.
5.4.4 Reverse
IMPORTANT
Reverse must be engaged only when the machine has
stopped moving.
Mechanical transmission
Press the pedal until the machine stops and then go into reverse by shifting the
lever sideways and into position «R» (
4.22). Gradually release the pedal to
engage the clutch and then begin moving in reverse.
Hydrostatic transmission
When the machine has stopped moving, start reversing by pressing the drive
pedal in direction «R» (
4.32).
Some select models have been updated with the additional safety
features to standards that affect reversing functions. These models are
fitted with a Reverse button (4.4) on the dashboard, which must be
pressed prior to and held down whilst reversing.
1
A
A = 30 mm
A = 10 mm
A = 20 mm
A = 0 mm
5.4.5 Grass cutting
Adjust the position of the anti-chipping
wheels according to how the ground is.
The anti-chipping wheels are used to
reduce the risk of tearing up sections
of lawn, which can occur when the
edge of the cutting deck drags over
irregular ground.
4.4