Victa VFU-18A309I, Руководство пользователя

Страница: 11 / 40

DC Inverter Duct Type Unit
9
For the units: 48 K
、
60K
Fig. 4.1
Table 4.1
Item
Model
A B C D E F G H I J
VFU-18A309I 945 618 738 892 1037 721 738 125 203 266
VFU-24A309I 1101 517 820 1159 1279 558 1002 160 235 268
VFU-36A309I 1011 748 820 1115 1226 775 979 160 231 290
VFU-48A309I 1177 646 852 1150 1340 750 953 190 316 350
VFU-60A309I 1177 646 852 1150 1340 750 953 190 316 350
4.1.2 Drilling Holes for Bolts and Installing the Bolts
Using the installation template, drill holes for bolts (four holes). (Fig. 4.2)
4.1.3 Installing the Suspension Bolts
(1). Install the bolts to the ceiling at a place strong enough to hang the unit.
Mark the bolt positions from the installation template. With a concrete drill,
drill for 12.7 mm (1/2”) diameter holes. (
Fig. 4.3)
(2). Insert the anchor bolts into the drilled holes, and drive the pins completely
into the anchor bolts with a hammer. (Fig. 4.4)
(3). Install the hanger to the unit. (Fig. 4.5)
(4). Pass the unit hangers over the bolts installed to the ceiling and install the
unit with the special nut.( Fig. 4.6)