Push the Tractor by Hand
1. Disengage the blade rotation control and turn the en-
gine o
ff
.
2. Pull the lever (
A
, Figure 13) toward the rear of the unit
and push down to lock in place. The tractor can now be
pushed by hand.
3. Pull up and push toward the front of the unit to engage
the transmission. The tractor can now be driven.
1. Return the ground speed control pedals (
C
, Figure
10) to the START/PARK position.
2. Disengage the blade rotation control (Figure 11) and
wait for all moving parts to stop.
3. Move the throttle/choke control (
D
, Figure 10) to the
SLOW position and turn the ignition key (
E
) to OFF.
Remove the key.
22
The Reverse Mowing Option (RMO) allows the operator
to mow in reverse (see
Features and Controls
). To
activate, turn the RMO key after the blade rotation control is
engaged. The L.E.D. light will illuminate, and the operator
can then mow in reverse. Each time the blade rotation
control is engaged the RMO needs to be reactivated if
desired. The key should be removed to restrict access to the
RMO.
WARNING
Mowing in reverse can be hazardous to bystanders.
Tragic accidents can occur if the operator is not alert to the
presence of children. Never activate the RMO if children
are present. Children are often attracted to the unit and the
mowing activity.
Reverse Mowing Option
(
RMO
TM
)
WARNING
Towing the unit will cause transmission damage.
Do not use another vehicle to push or pull this unit. Do not
actuate the transmission release lever while the engine is
running.
Adjust the Height of Cut
The mower lift lever (Figure 12) is used to lower and raise
the deck to the desired cutting height. The cutting height is
adjustable between 3,8 cm (1,5”) and 10,2 cm (4,0”).
To lower the deck, pull back slightly on the mower lift lever,
push it to the right and slide it down. To raise the deck, pull
up on the mower lift lever and lock in notch to the left.
Attach a Trailer
The maximum horizontal drawbar force allowed is 150
Newtons (34 lbs). The maximum vertical drawbar force is
90 Newtons (20 lbs).
Stop the Tractor and Engine
WARNING
Fuel and its vapors are extremely
fl
ammable and
explosive.
Fire or explosion can cause severe burns or
death.
• Do not choke the carburetor to stop the engine.
Parking Brake Function
Engage the Parking Brake -
To engage the parking
brake, release the ground speed pedals (
C,
Figure 10),
fully depress the brake pedal (
A
), pull UP on the parking
brake knob (
B
), and then release brake pedal.
Disengage the Parking Brake -
To disengage the
parking brake, fully depress the brake pedal (
C,
Figure
10) and push the parking brake knob (
B
) DOWN.
NOTE:
The transmission release lever is located on the
left side for General Transmission, and right side for Hydro
Gear.
Not
for
Reproduction
Содержание 2690990
