Viconte VC-1463, Инструкция по эксплуатации

Страница: 4 / 18

• This appliance should never be left unattended when plugged in.
• Close supervision is necessary when this appliance is used on, or near children or invalids.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly.
• Keep the cord away from heated surfaces.
• Do not pull, twist, or wrap the power cord around appliance.
• Never drop or insert any object into any opening of this appliance.
• Before use, make certain of blades are aligned properly.
• Do not place appliance on any surface while it is operating.
• Do not use this appliance neither with a damaged or broken comb nor with teeth missing from the blades as injury
may occur.
NOTE:
KEEP BLADES OILED.
BLADE ALIGNMENT
• Your clippers were carefully examined to ensure that the blades were oiled and aligned before
leaving our factory.
• Blades must be realigned if they have been removed for cleaning or replacement.
• To realign the blades, simply match the upper and bottom blades teeth up, point for point.
• End of top blade teeth should be approximately 1.2 mm back from bottom blade. Compare your clipper
blades with the sketch.
• If blade alignment is incorrect, add a few drops of oil to the blades, switch on clipper for a few moments,
switch off and unplug. Loosen screws slightly and adjust. Tighten screws after blade is aligned.
OIL
• To maintain your clipper in peak condition, the blades should be oiled every few haircuts.
• Do not use hair oil, grease, oil mixed with kerosene or any solvent. As the solvent will evaporate and leave
the thick oil which may slow down the blades motion.