Viconte VC-1463, Инструкция по эксплуатации

Страница: 8 / 18

STEP 5 – THE FINISHING TOUCH
• Finally, use the taper level without an attachment comb for close trimming around the base of the
neck, the sides of the neck and the ears.
• To produce a clean straight line at the sideburns, reverse the hair clipper by turning the reverse side
uppermost (ig.7).
• Press the clipper at right angles to the head, tips of the blades lightly touching the skin and work
downwards. This way you obtain, as a clean cut as would be given by a razor.
SHORT TAPERED STYLES – “FLAT TOP” AND SHART CUTS
• Starting with the longest attachment comb (12mm), cut from the back of the neck to the crown. Hold the
attachment comb lat against the head and slowly move the clipper through the hair, as shown (ig.8).
• ut the hair against the direction in which it grows from the front to the crown and then level the cut with
the sides.
• To give a “lat top” look, the hair on top of the head must be cut over the top of a lat comb rather than
by using the attachment comb.
• Use closer cutting attachment combs to taper the hair down to the neckline as desired. Comb hair and check
for uneven areas and outlining sideboards and neckline as described previously.
CLEANING AND STORAGE
• Remove cut hair from the clipper with the brush enclosed.
• Wipe the cutter with a dry soft cloth.
• Oil the blades as mentioned above.
• Keep the appliance in a dry room.
• You may hang the cutter by provided loop.
• The blades must be oiled for storage period.