Vicon VC2650-DSP, Инструкция по установке и эксплуатации

Страница: 81 / 86

and
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note :
When you press the Right/Left switches to control the values of “R Gain” and “B
Gain,” the cursor does not move right away. This is because the special
character”-“, which shows the “R Gain” and “B Gain” on the graph, represents
the value of 23. Th ere ore, the Right/Left switches have to be pressed 23 times
f
before the cursor can move.
5) After setting the white balance function, select the “RET” submenu to
exit from the menu.
Selecting Vertical Synchronization Mode (V-SYNC)
The vertical synchronization method of the can be assigned
by using the “V-SYNC” menu. Move the cursor to the “V-SYNC” menu
with the Up/Down switches. Press the Right/Left switches, and the
items “LINE” and will appear on the screen. If you want to use the
vertical synchronization signal by the internal clock of the
then select “INT.” If you want to adjust the vertical synchronization signal
in accordance with the outside power frequency, select “LINE.”