V923-N Quick Installation Guide
3.3 Setting the admin password over a secure connection
To gain access to the camera, the password for
the default administrator user must be set. This
is done in the “Admin Password” dialog, which is
displayed when the network
camera
is accessed
for the setup at the first time. Enter your admin
name and password, set by the administrator.
Note: The default administrator username is
“ADMIN” and password is “1234”. If the
password is lost, the network camera must be
reset to the factory default settings. See “3.6
Resetting to the Factory Default Settings”.
3.4 Live View Page
The live view page comes in seven screen
modes: 1920x1080, 1280x1024, 1280x720,
704x480 (576), 640x480, 352x240 (288),
and 320x240. Select the most suitable
mode in accordance with your PC
specifications and monitoring purposes.
1) General controls
Live View Page Search & Playback Page Setup Page Help Page
The video drop-down list allows you to select a customized or pre-programmed
video stream on the live view page. Stream profiles are configured under Setup > Basic
Configuration > Video & Image. . For more information, see “3.5.1 Basic Configuration > Video &
Image” of User’s Manual.
The resolution drop-down list allows you to select the most suitable
video resolutions to be displayed on Live View page.
The protocol drop-down list allows the selection of the combination of
protocols and methods to use depending on your viewing requirements and on the properties of
the network.
2) Control toolbar
The live viewer toolbar is available in the web browser page only. It displays the following
buttons:
The Stop button stops the video stream being played. Pressing the key again toggles the
start and stop. The Start button connects to the network camera or start playing a
video stream.
The Pause button pauses the video stream being played.
8
