V923-N Quick Installation Guide
3. Operation
The network camera can be used with Windows operating system and browsers. The recommended
browsers are Internet Explorer®, Safari®, Firefox®, Opera® and Google® Chrome® with Windows.
Note:
Some screens may appear different (i.e., color scheme) depending on the firmware version, but
the functionality is the same or similar.
3.1 Access from a browser
1. Start a browser (i.e., Internet Explorer).
2. Enter the IP address or host name of the network camera (the camera name as it appears in the
ViconNet site list) in the Location/Address
field of your browser.
3. A starting page displays. Click Live View or Setup to enter web page.
4. Click Live View for the network camera’s
Live View
page to appear in the browser.
3.2. Access from the internet
Once connected, the network camera is accessible on your local network (LAN). To access the
network camera from the Internet you must configure your broadband router to allow incoming data
traffic to the network camera. To do this, enable the NAT-traversal feature, which will attempt to
automatically configure the router to allow access to the network camera. This is enabled from Setup
> System > Network > NAT.
For more information, refer to “3.5.5 System>Network>NAT” of User’s Manual.
7
