Vicon V922B-W551-A1, Быстрое руководство

Страница: 8 / 20

8
2.2.1 Network Connection & IP Assignment
The network camera is designed for use on an Ethernet network and requires an IP address for access. Most
networks today have a DHCP server that automatically assigns IP addresses to connected devices. By the
factory default, your camera is set to obtain the IP address automatically via DHCP server. If your network
does not have a DHCP server the network camera will use 192.168.1.100 as the default IP address.
If DHCP is enabled and the product cannot be accessed, run the “Smart Manager” utility to search and
allocate an IP address to your products, or reset the product to the factory default settings and then perform
the installation again. The Sm
artManager utility is available on Vicon’s website, vicon-security.com , under
Software Downloads/Vicon Cameras/Encoders.
1) Connect the network camera/device to the network and power up.
2) Start SmartManager utility (Start > All programs > SmartManager > SmartManager).
The main window will display and after a short while any network devices connected to the network will
be displayed in the list.
3) Select the camera on the list and right click right the mouse. The pop-up menu displays as below.
4) Select Assign IP Address. The Assign IP window will display. Enter the required IP address.
NOTE: For more information, refer to the SmartManager User ’s Manual.