Vicon V922B-W551-A1, Быстрое руководство

Страница: 10 / 20

10
3.2 Access from the Internet
Once connected, the network camera is accessible on your local network (LAN). To access the network
camera from the Internet you must configure your broadband router to allow incoming data traffic to the
network camera. To do this, enable the NAT traversal feature, which will attempt to automatically configure
the router to allow access to the network camera. This is enabled from Setup > System > Network > NAT. For
more information, see “System > Network > NAT” of User’s Manual.
3.3 Setting the Admin Password over a Secure Connection
To gain access to the product, the password for the default administrator user must be set. This is done in the
Admin Password dialog, which is displayed when the network camera is accessed for the setup at the first
time. Enter your admin name and password, set by the administrator.
NOTE: The default administrator user name and password is “ADMIN” and the password is “1234”. If the
password is lost, the network camera must be reset to the factory default settings. Refer to “Resetting
to the factory default settings” at the end of this manual.
To prevent network eavesdropping when setting the admin password, this can be done via an encrypted
HTTPS connection, which requires an HTTPS certificate (see NOTE below). To set the password via a standard
HTTP connection, enter it directly in the first dialog shown below. To set the password via an encrypted HTTPS
connection, please see “System > Security > HTTPS” of User’s Manual.
NOTE: HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between web
browsers and servers. The HTTPS certificate controls the encrypted exchange of information.